TEK Z-Radio System
The Z-Radio System offers the versatility you need to go the distance!

The most recently developed active RFID products manufactured by TEK are the Z-Radio Modules. TEK’s system of three radio modules provide a ready-made platform for applications using the ZigBee Stack. Each module includes a complete 2.4GHz radio with antenna and flash based microcontroller. A Microchip ICD2 port on a mini Molex 5-pin header allows for firmware loading and debugging.

Click for data sheet	Z-TAG (Round Tag) This compact 1.4” diameter PCB includes a holder for a single 3V lithium coin cell.  The Z-TAG is intended as a complete minimal low power radio module for monitoring or active tagging applications. It has CC2420 plus PIC18LF2520 in a tiny package with ceramic antenna. This runs the 3.5 stack with enough resources for a basic RFD. The Z-TAG has three spare IO lines brought to a header for remote control or monitoring applications. The tag can easily accommodate a memory size of 128Kbytes.
Click for data sheet	Z-USB (Radio to USB Interface) This is a USB interface for connecting the radio network to a laptop or PC. It’s designed to fit into a readily available small Hammond plastic enclosure, available in either black or grey finish. The PCB is 1.1” x 2.1". A mini-USB port is built into the board for easy networking with a computer or PC. Using the FTDI FT232R chip, PIC 18LF2620 and CC2420, the Z-USB can run the Microchip 3.5 stack coordinator or RFD and is self-powered from the USB. Use with a standard mini-USB cable.
Click for data sheet	Z-LINK (Radio Link – Repeater) This is a slightly larger PCB, measuring 3.3” x 2.2". It has a battery holder for 3xAA cells on the back and a DC supply jack. The Z-LINK uses the PIC18F66J10 plus CC2420, folded PCB dipole antenna, regulated power supply with either 3xAA Alkaline primary cells, or NICADs. DC input for battery charging. The Z-Link also has an RS232 interface and fits into a readily available Hammond enclosure. The Z-LINK is primarily intended as a FFD/coordinator for mesh network to extend range of the other modules, but would make a fine platform for general purpose use where the larger size battery, more interfaces and large program memory is required. The Z-LINK can run RFD, FFD, Coordinator, or Router.  PIC is a trademark of Microchip Technology Inc.
These products can be ordered from Mouser.

TEK Z– Radio System (DOWNLOAD NOW)
The TEK Z-Modules are designed for compatibility with the Microchip technology ZigBee Stack V1.0-3.5.  Customer is responsible for licensing or compliance testing, including ZigBee compatibility, FCC compliance, and MAC address.